Why Is My Jeep Remote Start Not Working

(if they flash more than once, you may have to visit the dealer/installer) turn the vehicle off. Press and hold the lock button for five seconds.

Dodge Journey Remote Start Not Working

What i meant to say about the second key was.

Why is my jeep remote start not working. Saturday i used the remote start and when i went out it was not running. If you can lock and unlock your doors just fine but only the remote start does not work, you may be in valet mode. Hi, i'll check those things out tomorrow on my day off.

When i fiddle with the remote starter buttons or turn it from valet mode to on mode, i can get the jeep remotes to work. The remote start function not operating could be attributed to several things, such as low fuel or door being ajar. Is the remote start system a stock item that came with the jeep or is it aftermarket?

My remotes will work for a few months and then die for a few months or weeks. If low fuel warning is. People have had problems with them sticking and not reading right, and that will cause the remote start to not work.

Just thought i'd pass that along for people who have the remote. I was tired after work yesterday. Remote start instructions for jeep and chrysler vehicles.please subscribe to my channel for more great content:

Ok, so just as i suspected, the lojack must have been causing the remote start not to work. No i have not figured it out. The vehicle is supposed to shut off after 15 minutes when started by remote tho.

It is not the batteries in the remote. Also checked to see if it would start the jeep from inside on just the aux battery, it would not. Antennae that he'll have to order.

When you turn the key, do you get a. Apparently everything on your key fob and the tire pressure indicators goes to this module and they're all on different. When i try to remote start my 2018 jlu it will flash the lights and beep once and not start.

If you go outside and stand next to the driver window and look inside while trying to remote start, sometimes the instrument cluster will show for a brief moment why it didn't start. I turned the ignition on and everything else seemed to be. Well, it doesn't work now.

My 2012 with 500 miles, remote start has taken a crap!!!! The jeep dealer says that i'll need a $500. Sounds a bit fishy to me.

I pulled one of the fuses, and the light to the lojack module went out. My theory now is that it has something to do with the remote starter that was installed in the car. Why is my jeep remote start not working.

Gas cap should be tight after 1 click. If its taking more than 1 click to be tight, or at least tight enough so the jeep doesnt throw a code for the gas cap, i would press the dealer for a new gas cap. People have had problems with them sticking and not reading right, and that will cause the remote start to not work.

Your parking lights will flash once. It says canceled a door is open. It is on the side of the engine bay and the hood presses down on it to let the jeep know the hood is down.

Low fuel and remote start i don't usually let my jeep get to the low fuel, but it was cold and i was lazy friday coming home from work. About press copyright contact us creators advertise developers terms privacy policy & safety how youtube works test new features press copyright contact us creators. Part # 05026189ah for $176 (part only).

I lowered the dash compartment to trace the wires from the lojack module mounted under the steering wheel. The jeep dealership said i needed to replace the wireless control module. Thinking aux battery issue may be the problem.

If they no longer flash when you ask your vehicle to lock or unlock using the remote starter controller, you may be in valet mode. So if you have low fuel the car won't remote start so you don't run out. Remote starter on my 2015 jeep cherokee doesn't work.

One way you may be able to tell if your vehicle is in valet mode is by watching the parking lights. When i hit the lock button twice the lights blink, but nothing happens. While keeping your foot on the brake, press the remote start button on your remote control for 3 seconds like you are remote starting the vehicle.

I only tried remote start at the dealer when i picked mine up. • with remote start, the engine will only run for 15 minutes (timeout) unless the ignition key is placed in the mar/run position. Starts fine with push button start.

I had read that you needed the two original keys for programming any new keys and would it possibly have anything to do with the remote start not working. I did disconnect the main battery to check voltage on aux battery, it was 11.7. My remote start quit working too.

If the remote start system is not working in your jeep grand cherokee the first thing that you should check is the battery in the key fob. Turn the key to the run position and aim the keyless remote at the steering wheel. Also, it is important to think of anything that has changed in the vehicle since it remote started last.

There were 2 fuses attached to the module. If this battery is dead then your fob will not be able to communicate with the receiver in the suv and tell it to turn on the car. I also did some reading last night, as posted above, fuel level is also a potential reason for remote start not working.

Ive never had an issue with any codes or my remote start working and i have never gone over 1 click.

Why Is My Jeep Remote Start Not Working