6 things you need to know. If you don’t hear a click, use a multimeter to use the door switch for continuity.
√ amana dryer won t start just clicks in 2022.
Amana dryer won't start just clicks. The dryer won't start if the door switch senses that the door is open. 3978994 and can't purchase just the thermal fuse as you listed above. Get more answers from the people in your networks.
If the dryer does not respond or make any noise, the start switch could be at fault. There are several reasons for that, why your dryer just clicks but wont start. If the door switch makes a clicking sound, it is probably not defective.
If the thermal fuse is okay, you could have a bad start relay even though it is clicking. You could unplug the dryer and bypass the start relay in a similar manner to the thermal fuse to check this component. If the switch does not have continuity, replace it.
Leave a comment on amana dryer won't start just clicks. Amana dryer won't start just clicks. The door switch activates when the dryer door is closed.
Use a multimeter to test the start switch for continuity. My kenmore dryer wont start but only makes a clicking sound when i push the start button. Mine is also a kenmore dryer mod 110.87572601.
To determine if the door switch is working, try starting your dryer and then listen for the “click.”. Even gas models require electricity to power the control panel and other functions. If the dryer hums but does not start, the start switch is not at fault.
If the switch does not have continuity, replace it. On most dryers, the door switch makes an. Get more answers from the people in your networks.
Amana dryer ned4600yq0 won't start or doesn't start won't start is the most common symptom. Report this by manage my life. Some of them are drum belt broken, idler pulley broken, thermal fuse blown
The dryer won't start if the door switch senses that the door is open. So if you don't get a humming or anything when you push the knob in to start the dryer and the door switch, fuse, and power is good. To access the start relay in the console, remove the screws on the back of the end caps of the console and you can then lift it off of the top panel (with the dryer.