Excalibur Remote Start Installation Manual

Consult your installer for more information. • programmable feature matrix is.

Excalibur Rs-370 4-button 1-way Remote Start And Keyless Entry System Up To 1500-foot Range At Crutchfield

Choose a discreet mounting location for the module and locations.

Excalibur remote start installation manual. Need to know where all the components. Ignition on, off, press valet 10 times 1 doorlock pulse 0.8 sec 3 sec double unlock total closure step 1 is all you need to get started! Installation tips for your excalibur remote start (for honda and acura vehicles).

Your mounting location avoid any moving vehicle parts or parts that. Press “lock” or “unlock” for 3 seconds silent lock/unlock: Identify vehicle connection points and plan harness routing from.

There are 4 basic steps to this remote start installation. Ignition on, off, press valet 10 times 1 doorlock pulse 0.8 sec 3 sec double unlock total closure step 1 is all you need to get started! Send the remote start command via your remote.

Excalibur remote start installation manual. Need to know where all the components. Excalibur remote start installation manual author:

Remote control transmitter manual details for fcc id cn2exc9158a made by laird controls north america inc. Program the tach circuit as shown on page 10 of the installation manual. We’re going to address each of these:

Program the tach circuit as shown on page 10 of the installation manual. • 4 button transmitter included. Be the first to review this product.

Apply the parking brake and release the brake pedal. Need to know where all the components. Press “start” twice in 5 seconds (see installer feature #1 for options) panic:

With the engine running by key (more than 10 seconds), hold the brake pedal & place the transmission in neutral. Generate heat also avoid any sharp metal edges see. The remote start should engage (led flashing).

There are 4 basic steps to this remote start installation. Put the car in neutral then set the ebrake, you year a click then pull the key out with the car still running. For any accessories (siren, sensors, interface module, etc ) do not.

(you might anger the install. Make your wiring connections for the remote start 2. Make your wiring connections for the remote start 2.

We’re going to address each of these: 433mhz 1.lock button 2.unlock button 3.trunk button 4.start button technology

Rs-310 – Omegarepcom Manualzz