Excalibur Remote Start Troubleshooting

Put key in ignition but do not turn and try and remote start. The system will exit at any time after 10 seconds of no activity.

Excalibur Remote Start Troubleshooting Jobs Ecityworks

The only thing which stop the engine once the remote starter has started it is pressing the brake or pressing the kill button on the remote starter.

Excalibur remote start troubleshooting. Hold key sideways up to the cylinder and try to remote start. Your vehicle and intend to use remote start later perform these steps: Download manuals & user guides for 33 devices offered by excalibur in remote starter devices category.

Turn key to accessory and try to remote start. Without this, a mechanic could be seriously injured if the vehicle was remotely started. Sometimes it takes 2 or more times to unlock my doors or sometime it take a couple of times to set when my starter acts up my battery dies in my car.

That will give us direction for the true problem. Enormis can help with the electrical problem in your car. If pulling the fuse disables the alarm, then leaving the fuse pulled for over a minute (60 sec.s) should reset it.

Your starter is a mux system with separate accessory and ignition wires. The status light will start to flash slow. When the first remote is learned all previous remotes are erased.

Choose one of the enlisted appliances to see all available service manuals. Turn the ignition key “off”. March 27, 2016 at 10:11 pm.

Turn key to ignition and try to remote start. Opening the door should turn off the engine as does the factory remote start, however opening the door does not stop the engine, nor does inserting the key and turning it on/off. Download 18 excalibur car alarm pdf manuals.

Excalibur Remote Start And Security Perfected User Guide – Manuals