Skip to content
It was working fine last night. Start date apr 17, 2014;
Pin On Laundry Room
The lights on the controls worked.
Kenmore elite smartheat dryer won't start. I unplugged in and remove that back in to see if any of the wires were lose. You must read 120 volts and if you do then either the control is bad or the interface/console is bad. I tried to start it normally, on the timer and it just beeps.
Kenmore elite smartheat dryer won't start. If it does not start, make sure the belt is intact because if the belt it broken or has come off; My kenmore elite smartheat quiet pak4 dryer won't start.
Joined apr 17, 2014 messages 3 location florida. I'd suggest you start by checking voltage from the black wire on the p1 connector to the white wire on the same connector. What happened just before the light on your kenmore dryer came on?
The motor will not start. I have a big family that does laundry every day. You can check the control board with a voltage meter.
Ask your own appliance question. My kenmore elite smart heat quiet pak 9 he4 will not start when i press the start button it just beeps about 3 times even though it powers on. The door switch activates when the dryer door is closed.
If the dryer does not respond or make any noise, the start switch could be at fault. If the belt is intact then i would suspect a faulty control board. On most dryers, the door switch.
If the switch does not have continuity, replace it. When i tried to start it beeped three times rapidly. Use a multimeter to test the start switch for continuity.
When i tried to start it beeped three times rapidly. The sensor light keeps coming on. I tested the thermal fuse and all the fuses it wasent the answer.
You must read 120 volts and if you do then either the control is bad or the interface/console is bad. Nothing weird just normal loads With the dryer unplugged you can even unplug the ribbon connector and then reinstall it and see if there was any improvement.
Customer reply replied 8 years ago. If the dryer hums but does not start, the start switch is not at fault. Kenmore elite smartheat dryer won't start.
I tried to search the forums for answer everyone was saying its the thermal fuse. Timer light shows time, when i push to start, timer light blinks and there are three short beeps. 110.67732794 kenmore 70 series dryer not starting, just makes humming noise when start pressed.
I'd suggest you start by checking voltage from the black wire on the p1 connector to the white wire on the same connector. You must read 120 volts and if you do then either the control is bad or the interface/console is bad. So it was either the door switch or control board…
Kenmore elite smartheat dryer won't start.
F02 Error Code He3 Elite Washer – Kenmore Elite He3 Washing Machine – Ha Ha Fix-it Man That Cant Come Til Tuesday – We F Kenmore Kenmore Elite Washer Repair
